It is paramount to ensure that the sides are rigrouslyfixed so that our night curtain fits your window perfectly.
Necessary dimensions are the following ones:
Overall width (LHT) = width of the finished curtain - take the overall external width if the curtain is to be installed outside the window.
- take the interior width between the sides if the curtain is to be installed within the interior of the
window.
Fabric height : Measurement between the highest and lowest points (unrolled lenght).
CURTAIN ASSEMBLY WITH CASING (model MTRA)
The 3 longitudinal grooves of the section are dovetailed and allow fitting on to the cabinet in any position, simply by drilling 2 X 3 mm holes in each support. Aligning the curtain with neighbouring curtains is automatically done by making the support overlap the latter, which results in the suppression of one support overlap the latter, which results in the suppression of one support out of two at each junction. A press-stud keeps stopgaspi open in its low position.
CURTAIN ASSEMBLY WITHOUT CASING (model MT)
On the models without casing, the fixing brackets are automatically assembled at either end of the curtain.
It can be assembled either on a bracket or from the ceiling (see below).
STOPGASPI® : the ideal solution.
SARL
au capital de 7622 € – SIRET 409 244 696 00020 – CODE
APE 292F
