MTRA CURTAIN curtain with casing
The STOPGASPI® MTRA curtain is a manual thermal protection curtain made of reflective aluminized fabric and micro pore which rolls up into an anodised aluminium casing by means of a spring mechanism.
When unrolled the curtain is held in place by a small tongue and press stud (standard version). For other fixtures refer to accessories.
FIXING THE SIDE
It is paramount to ensure that the sides are rigrouslyfixed so that our night curtain fits your window perfectly.
Necessary dimensions are the following ones:
Overall width (LHT) = width of the finished curtain
- take the overall external width if the curtain is to be installed outside the display cabinet.
- take the interior width between the sides if the curtain is to be installed within the interior of the display cabinet.
Fabric height : Measurement between the highest and lowest points (unrolled lenght).
CURTAIN ASSEMBLY WITH CASING (model MTRA)
The 3 longitudinal grooves of the section are dovetailed and allow fitting on to the cabinet in any position, simply by drilling 2 X 3 mm holes in each support. Aligning the curtain with neighbouring curtains is automatically done by making the support overlap the latter, which results in the suppression of one support overlap the latter, which results in the suppression of one support out of two at each junction.